OEM 지식
Screen Printing on Heavyweight T-Shirts: Artwork, Ink, Placement and Bulk Approval
A B2B guide to screen printing heavyweight T-shirts, including artwork setup, fabric surface, ink selection, placement control and wash-tested approval.
Choose screen printing for the right order
Screen printing is often efficient for repeat artwork and larger production runs, but suitability depends on artwork, number of colors, garment color, expected hand feel and the requested quantity. Before comparing price, define the final print size, placement count, color count, opacity requirement and whether the design needs special effects. Ask suppliers to quote the same assumptions so screen setup and per-piece economics are comparable.
Review the heavyweight fabric surface
Heavyweight cotton can provide a structured print base, but yarn hairiness, garment wash, pigment effects, softeners and surface texture influence edge definition and ink adhesion. Test the actual body fabric and colorway; a smooth 230 GSM combed cotton T-shirt may accept fine artwork differently from a 280 GSM salt-washed tee. Include the finished fabric and wash route in the print-approval file.
Prepare artwork with production in mind
Provide vector or high-resolution art, exact dimensions, named spot colors or approved color references, placement measurements and a clear version number. Fine lines, halftones, distressed areas and overlapping colors should be reviewed at final print size, not only on a screen. If the design intentionally uses a vintage or cracked effect, show the approved visual range so it is distinguishable from uncontrolled loss of coverage.
Approve color, hand feel and placement together
A strike-off should be evaluated on the final garment with the chosen ink system. Check color, opacity, registration, edge sharpness, stiffness, print height and distance from neck, center line or side seam. Heavyweight fabric does not eliminate placement variation, especially on oversized fits. Use a placement diagram measured from stable garment points and retain one approved strike-off for bulk reference.
Wash-test the printed sample
Inspect the print after the relevant care cycle for cracking, adhesion change, excessive color loss, dye migration or unacceptable hand feel. The result must be assessed on the approved garment, because a print can pass on a test panel but behave differently across seams, stretch zones or washed surfaces. Document the care method, expected visual change and acceptance criteria before production begins.
Control the bulk print run
Link the approved artwork, garment sample, ink and color reference, mesh or screen notes where relevant, placement sheet and inspection plan. During production, check early pieces for registration, curing and position before the full run proceeds. Final inspection should cover print condition, color consistency, placement, garment defects and packing. The aim is repeatability of the approved result, not a generic claim that a method is suitable for every artwork.
조사 출처
기사 또는 이미지가 권리를 침해하는 경우 연락 주시면 삭제하겠습니다. oem@tshirtoemfactory.com